Leggere una riga da uno streamreader senza consumare?
-
20-08-2019 - |
Domanda
Esiste un modo per leggere in anticipo una riga per verificare se la riga successiva contiene dati tag specifici?
Ho a che fare con un formato che ha un tag iniziale ma nessun tag finale.
Vorrei leggere una riga aggiungerla a una struttura, quindi testare la riga seguente per assicurarsi che non sia un nuovo " nodo " e se non continua ad aggiungere se è vicino a quella struttura e ne crea una nuova
l'unica soluzione a cui riesco a pensare è quella di avere due lettori di stream che vanno nello stesso momento in un certo senso soffiando lì lungo il gradino di blocco ma questo sembra uno spreco (se funzionerà)
Ho bisogno di qualcosa come sbirciatina ma peekline
Soluzione
Il problema è che il flusso sottostante potrebbe non essere nemmeno ricercabile. Se dai un'occhiata all'implementazione del lettore di stream, utilizza un buffer in modo da poter implementare TextReader.Peek () anche se lo stream non è ricercabile.
Potresti scrivere un semplice adattatore che legge la riga successiva e la buffer internamente, qualcosa del genere:
public class PeekableStreamReaderAdapter
{
private StreamReader Underlying;
private Queue<string> BufferedLines;
public PeekableStreamReaderAdapter(StreamReader underlying)
{
Underlying = underlying;
BufferedLines = new Queue<string>();
}
public string PeekLine()
{
string line = Underlying.ReadLine();
if (line == null)
return null;
BufferedLines.Enqueue(line);
return line;
}
public string ReadLine()
{
if (BufferedLines.Count > 0)
return BufferedLines.Dequeue();
return Underlying.ReadLine();
}
}
Altri suggerimenti
È possibile memorizzare la posizione accedendo a StreamReader.BaseStream.Position, quindi leggere la riga successiva, eseguire il test, quindi cercare la posizione prima di leggere la riga:
// Peek at the next line
long peekPos = reader.BaseStream.Position;
string line = reader.ReadLine();
if (line.StartsWith("<tag start>"))
{
// This is a new tag, so we reset the position
reader.BaseStream.Seek(pos);
}
else
{
// This is part of the same node.
}
È molto cercare e rileggere le stesse righe. Usando un po 'di logica, potresti essere in grado di evitarlo del tutto - ad esempio, quando vedi un nuovo tag iniziare, chiudere la struttura esistente e avviarne una nuova - ecco un algoritmo di base:
SomeStructure myStructure = null;
while (!reader.EndOfStream)
{
string currentLine = reader.ReadLine();
if (currentLine.StartsWith("<tag start>"))
{
// Close out existing structure.
if (myStructure != null)
{
// Close out the existing structure.
}
// Create a new structure and add this line.
myStructure = new Structure();
// Append to myStructure.
}
else
{
// Add to the existing structure.
if (myStructure != null)
{
// Append to existing myStructure
}
else
{
// This means the first line was not part of a structure.
// Either handle this case, or throw an exception.
}
}
}
Perché la difficoltà? Restituisce la riga successiva, indipendentemente. Controlla se si tratta di un nuovo nodo, in caso contrario, aggiungilo alla struttura. Se lo è, crea una nuova struttura.
// Not exactly C# but close enough
Collection structs = new Collection();
Struct struct;
while ((line = readline()) != null)) {
if (IsNode(line)) {
if (struct != null) structs.add(struct);
struct = new Struct();
continue;
}
// Whatever processing you need to do
struct.addLine(line);
}
structs.add(struct); // Add the last one to the collection
// Use your structures here
foreach s in structs {
}
Ecco cosa vado finora. Ho percorso più percorso diviso che percorso streamreader linea per linea.
Sono sicuro che ci sono alcuni posti che stanno morendo per essere più eleganti, ma per ora sembra funzionare.
Per favore fatemi sapere cosa ne pensate
struct INDI
{
public string ID;
public string Name;
public string Sex;
public string BirthDay;
public bool Dead;
}
struct FAM
{
public string FamID;
public string type;
public string IndiID;
}
List<INDI> Individuals = new List<INDI>();
List<FAM> Family = new List<FAM>();
private void button1_Click(object sender, EventArgs e)
{
string path = @"C:\mostrecent.ged";
ParseGedcom(path);
}
private void ParseGedcom(string path)
{
//Open path to GED file
StreamReader SR = new StreamReader(path);
//Read entire block and then plit on 0 @ for individuals and familys (no other info is needed for this instance)
string[] Holder = SR.ReadToEnd().Replace("0 @", "\u0646").Split('\u0646');
//For each new cell in the holder array look for Individuals and familys
foreach (string Node in Holder)
{
//Sub Split the string on the returns to get a true block of info
string[] SubNode = Node.Replace("\r\n", "\r").Split('\r');
//If a individual is found
if (SubNode[0].Contains("INDI"))
{
//Create new Structure
INDI I = new INDI();
//Add the ID number and remove extra formating
I.ID = SubNode[0].Replace("@", "").Replace(" INDI", "").Trim();
//Find the name remove extra formating for last name
I.Name = SubNode[FindIndexinArray(SubNode, "NAME")].Replace("1 NAME", "").Replace("/", "").Trim();
//Find Sex and remove extra formating
I.Sex = SubNode[FindIndexinArray(SubNode, "SEX")].Replace("1 SEX ", "").Trim();
//Deterine if there is a brithday -1 means no
if (FindIndexinArray(SubNode, "1 BIRT ") != -1)
{
// add birthday to Struct
I.BirthDay = SubNode[FindIndexinArray(SubNode, "1 BIRT ") + 1].Replace("2 DATE ", "").Trim();
}
// deterimin if there is a death tag will return -1 if not found
if (FindIndexinArray(SubNode, "1 DEAT ") != -1)
{
//convert Y or N to true or false ( defaults to False so no need to change unless Y is found.
if (SubNode[FindIndexinArray(SubNode, "1 DEAT ")].Replace("1 DEAT ", "").Trim() == "Y")
{
//set death
I.Dead = true;
}
}
//add the Struct to the list for later use
Individuals.Add(I);
}
// Start Family section
else if (SubNode[0].Contains("FAM"))
{
//grab Fam id from node early on to keep from doing it over and over
string FamID = SubNode[0].Replace("@ FAM", "");
// Multiple children can exist for each family so this section had to be a bit more dynaimic
// Look at each line of node
foreach (string Line in SubNode)
{
// If node is HUSB
if (Line.Contains("1 HUSB "))
{
FAM F = new FAM();
F.FamID = FamID;
F.type = "PAR";
F.IndiID = Line.Replace("1 HUSB ", "").Replace("@","").Trim();
Family.Add(F);
}
//If node for Wife
else if (Line.Contains("1 WIFE "))
{
FAM F = new FAM();
F.FamID = FamID;
F.type = "PAR";
F.IndiID = Line.Replace("1 WIFE ", "").Replace("@", "").Trim();
Family.Add(F);
}
//if node for multi children
else if (Line.Contains("1 CHIL "))
{
FAM F = new FAM();
F.FamID = FamID;
F.type = "CHIL";
F.IndiID = Line.Replace("1 CHIL ", "").Replace("@", "");
Family.Add(F);
}
}
}
}
}
private int FindIndexinArray(string[] Arr, string search)
{
int Val = -1;
for (int i = 0; i < Arr.Length; i++)
{
if (Arr[i].Contains(search))
{
Val = i;
}
}
return Val;
}